Directional Flat Top Bend – Features a flat profile overall with a rocker nose for the stability and effortless float perfect for deep days on surfy terrain.

Personality – 3-6 (Playful - Medium)

Directional Flex – This flex features increased pop in the tail and a more resilient nose that allows riders to easily maintain control through all terrain and conditions.

Directional – The classic snowboard shape, designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while still giving you plenty of float, flow, and control to rip any terrain or condition.

30mm Taper – Taper promotes floating and turning with a shorter width on the tail that drops it down and a wider width at the nose that pops it up.

FSC™ Certified Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

45° Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

Split Channel – Go ahead and get picky with your splitboarding stance, and continue to fine-tune it as the season unfolds. With the Split Channel, you get the strongest, fastest, easiest, and most adjustable mounting system ever offered on a splitboard. The days of compromise are officially over. All Burton splitboards with the Split Channel come with pucks pre-mounted for easy setup.

Spark R&D Tesla T1 Single Wire Baseplate – A single fatty wire built into the baseplate switches easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. Eliminating the second wire saves weight and fiddle time.

Machined Aluminum

Burton-Designed Single-Component Negative Lean Hi-Back – The simplicity of a one-piece hi-back means immediate response. Through material blends we then manipulate the overall flex profile—from buttery to responsive.

Compatibility – Must be used with Step On™ compatible boots.

Toe Hooks 2.0

18mm Aluminum, Three-Section Shaft with Speed Cone Deployment

Adjustable-Length with a Compact, Packable Design

FlickLock Pro Security with Adjustability Up to 20cm

Touring Series Grip with Fluted Interior for Weight Reduction

Integrated Rubber Grip Extension

Touring Series Strap with Lightweight Webbing and Plastic Ladder-Lock Buckle

100mm Compact Powder Baskets with Two-Section Pole Capture

Warning – This product can expose you to chemicals including Bisphenol A (BPA) and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.