Surfy Camrock – Features extended rocker at the nose and regular camber through the rest of the board. Together with a shorter tail, it allows you to glide over bumps or pow and initiate turns off the back foot for a unique, surf-like ride.

Flex Rating – 8 (1 Soft - 10 Stiff)

Light Core – Nidecker's lightest core is composed of three wood types, including featherweight paulownia and super responsive poplar. Hardwood beech stringers down the center enhance the overall strength and boost pop.

Power Rails – An exclusive Nidecker construction inspired by surfboards. The topsheet is wrapped over a rounded wood core to meet a thin sidewall. It's a beautiful finish that's even more stunning to ride, delivering instant drive through the edge.

Triax Plus – Oriented 45 degrees to the board and contains different glass densities. This provides consistent torsional flex, better pop, and more reactivity on every turn.

Pop Carbon Plus – Pop Carbon is deployed on both sides of the core and from tip to tail, beefing up the flex. Ideal for aggressive riders who want snappy edge response, tons of pop and a smooth ride at high speeds.

N-9000 Sintered – A lightning quick sintered base made from super dense material with a high carbon content to minimize friction. Wax it on the regs for race-level performance.

Diecut Base

Absorbnid – This innovative top layer has been developed to absorb unwanted vibrations allowing for responsive and dynamic boards that still give you a smooth and comfortable ride.

Matte Finish

Overprint

2x4 / 6 Inserts – 6 rows of inserts at 2 cm intervals gives you maximum choice of stance width and works with any binding on the market.

Response – 8 (1 Soft - 10 Stiff)

Toe Heel Stiffness – 8 (1 Soft - 10 Stiff)

Lateral Stiffness – 8 (1 Soft - 10 Stiff)

Carbon Auto Base

Heel Pedal – The heel pedal activates the automatic closing of the hiback and straps, and locks the engagement system. This mechanism is self-cleaning to avoid snow build-up, and there are three engagement clicks for increased security.

Release Lever – Push to unlock the engagement system and lift your boot up & out. The release lever is located on the medial side of the baseplate for maximum ergonomic effi ciency and protection from external triggers.

Heelcup Roller – The heelcup roller reduces friction and guides the heel of the boot down, for buttery-smooth entry and exit.

Slip-N-Grip Plate – Reduces friction with the outsole of your snowboard boot. Allows you to easily slide in and out, without compromising the underfoot comfort of 2.5° Bankbeds.

Nylon Multidisk – 4HP + 3HP + Channel

Carbon S Ultraback

Reclining Highback – The Reclining Hiback creates the fastest automatic entry system. It fully folds down, creating a large opening to conveniently drop in your boot.

Exo-Kush Pro S Hybrid Straps

Hexo Toe Cap with Aux Tech – A 3D Hinged Auxetic pattern for unmatched formfitting the toebox of your boot.

Active Strap – As you recline the hiback, the footstrap gets actively lifted out of the way, so you can easily and conveniently get your boot in and out. The straps hug your boot with the tightness at which you first set them, each & every time you drop in.

LSR 2.0 Auto-Lock Carbon – Locking Slap Ratchet buckles lock down to secure your preferred footstrap tightness. Either Set-it and Forget-it for the Automatic mode, or just use them like regular buckles for the two-strap experience.

Drop In Technology – This technology was developed to allow easy opening and closure in complete safety. Multiple notches allow the binding to lock shut from the first click; there are three in total, which allow closure even if obstructed by snow accumulation. Just in case you’re in steep or off-camber terrain...or waist deep powder.

2.5 Degree Canted Footbeds

Flex Rating – 5 (1 Soft - 5 Stiff)

1:1 Lasting – This new new last is the keystone of the boot - the best fit in snowboarding today. Nidecker landed on an 8° forward lean - the sweet spot between comfort and performance. 1:1 Lasting means a specific liner, shell and footbed for each full and half size. Women’s, men’s and youth boots seperate lasts for full anatomical accuracy

3D Molded Tongue – The asymmetrical tongue is 3D molded and curved towards the medial side, following the naturally raised ridgeline of your forefoot to alleviate pressure points and give a more balanced feel of comfort and support. An anatomically correct and asymmetrical tongue performs better than a standard straight one.

Internal Heel Lock – Powered by the external side dial, the double lace goes through an internal harness attached to the shell and tongue. When you tighten it, it creates a three-dimensional ankle lock. Lateral tightening from the harness around the ankle ball, and frontally from laces which pass through the tongue, lowering it downards against your instep

Diamond Liner – Made from state-of-the-art memory foam, it delivers a secure, custom fit with more consistent forward flex.

Thinsulate™ – The benchmark in lightweight thermal insulation, developed by the experts at 3M.

Asym 3F – Part of the ASYM3F Technology : FIT - FEEL - FLEX are combined in an asymmetric shape and closure system that delivers optimum support and flex. Lined up along the asymmetrical molded tongue, the Boa® Fit System lace guides are also asymmetrically positioned on the flatter areas of your forefoot for less point-loaded pressure and a more even closure, which increases medial arch support to reduce foot fatigue and cramping. This Nidecker innovation is codeveloped with and approved by Boa®.

Dual BOA

H4 Coiler™ BOA Technology – Effortless and fast, the Coiler quickly takes up lace slack, increasing speed of entry into the boot. Ready for anything, designed to withstand

3D Triple Density – Premium 3D insole uses triple-density EVA to cradle your foot. Firm support at the heel cup and arch combines with a high-rebound heel layer, while a fleece-lined footbed with silicone print adds warmth and grip.

OC Kush – Shock-absorbing dynamic gel pads are inserted into the outsole around the heel area. This extra cushioning helps you soak up heavy landings and reduces fatigue from bumpy snow, as well as making your boots super comfy to walk around in.

Vibram® Approach Outsole – This top-of-the-range outsole comes with a full EVA midsole for the best possible comfort under the whole foot. An OC-Kush insert gives excellent dampening under the heel. The highlight is the new Vibram ICE-TREK compound, which is the best rubber available for cold, icey or snowy surfaces. Extra grip at toe and heel was inspired by fish scales.

Exo Spine – An external backstay that supports the whole boot and transfers energy instantly from heel to toe. It connects seamlessly to the outsole via our Transition Zone, so you won't hook up on the binding's heelcup when you enter or exit your binding.

Storm Cover – A water-resistant PU/mesh cover with zipper. The Storm Cover keeps feet dry for long days in deep snow conditions and features a 3D engineered knit to perfectly match the shape of the boot. Stretchable material at the top eases closure.

Space Blanket – A thermal insulation barrier between the outsole and the bottom of the liner keeps the warmth inside and the cold outside.

Custom Calf – Velcro wings at the back of the shell can be adjusted to accommodate bigger calves and gain extra stride length when splitboarding.