Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Directional Flex Pattern

Flex Rating – 8 (1 Soft - 10 Stiff)

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

FSC™ Ultra Split Core – Dual density premium wood core, made from mostly paulownia with specially positioned poplar stringers for better durability and turn power.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Sustainable Flax / Basalt Stringers – Jones exclusive sustainable stringers made with 100% natural fibers. Composite Flax and Basalt stringers help transfer power to the edges, improve torsional response, and absorb board chatter.

Stainless Steel Reinforcement – Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Flip Flop Base – Flip-Flop bases improve board sustainability by reducing p-tex waste.

Traction Tech 3.0 – Traction Tech 3.0 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.

Inner Edge Traction Tech – Inner edge Traction Tech improves splitboard edge grip on ascent. Three side cut "bumps" on each side of your binding keep you locked in on icy skin tracks no matter which way you are traversing.

Inner Thin Recycled Edges – Advancements in ski edge durability allow Jones to use thinner edges to save weight.

Outer Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Textured Eco-Plastic Topsheet – Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Karakoram Ultra Clips with Tips Lock – Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Quick Tension Tail – A built in climbing skin tension system with a pre-cut notch that eliminates the need for a traditional skin tail clip.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Dual Ride Stride – Saving energy in the backcountry can be the difference between going for a second lap, going for a longer tour, or going home because you’re wiped out. All Karakoram splitboard bindings come standard with Dual Ride-Stride forward lean. With a -8° forward lean setting, Stride Mode allows you to stride and glide further with every step. Dual Ride modes allow you to effortlessly switch between railing carves and surfing turns. Drive Mode consists of a preset user-adjustable forward lean (0°-22°), and surf mode can be activated without unstrapping (11° or 0°). Simply turn and go. Dual RideStride is the fastest and easiest forward lean adjustment available.

Dual-Speed Riser with Heel Lock Pole Basket Flip – Flip up/down with pole basket on the fly. Retractable Heel-Lock included.

Smooth Touring Pivot – Independent sleeves rotate freely on a fixed thru-axle, similar to a bike axle, making these stiff and smooth. They're wide for touring rigidity, they shed snow well, and the quick-releasing bracket allows for simple transitions.

Heel Lock – On-the-fly heel lock down Release load equivalent to DIN 6 Heel-Lock folds out of way when not needed.

Active Joining – No slop with instant response. Pre-loaded contact points create an ultra solid connection between your bindings and splitboard.

Ride Mode 3.0 – Lighter. Better. Faster. Stronger. A smaller footprint with less material makes the Ride Mode 3.0 the lightest splitboard interface. More clearance for snow makes Drop-On changeovers better and faster. Active Joining pulls your splitboard together and keeps your feet spring-loaded to the board, giving you direct power transfer to the edge and instant response in a way that passive, slip-fit puck splitboard systems cannot.

Direct Power Transfer – Wide binding contact = power transfer directly to edges & tip to tail.

Interlocking Seam Tabs – No separation: tabs interlock across the seam of your board, interlocking and pre-loading the two halves for a solid ride.

X-Type Chassis

Chassis Feel – 6 (1 Soft - 10 Stiff)

Wayfinder Strap – Compatible with small boots, down to women's 5

C4 Highback – Carbon Nyolite and Airpod Strap

Highback Feel – 8 (1 Soft - 10 Stiff)

Quiver Connecters sold separately for solid boards

Split Interface Included (W/ Ride Mode 3.0)

Compatible with Standard Splitboard Inserts

18mm Aluminum, Three-Section Shaft with Speed Cone Deployment

Adjustable-Length with a Compact, Packable Design

FlickLock Pro Security with Adjustability Up to 20cm

Touring Series Grip with Fluted Interior for Weight Reduction

Integrated Rubber Grip Extension

Touring Series Strap with Lightweight Webbing and Plastic Ladder-Lock Buckle

100mm Compact Powder Baskets with Two-Section Pole Capture

Warning – This product can expose you to chemicals including Bisphenol A (BPA) and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.